Acronos M1 Pure Class A
Integrated Stereo Amplifier
Designed and produced 100% in Spain
Glorious mid-range, wide scene and splendid dynamics
A universe of nuances, with an enriching softness and body. Those looking for the silk and texture of the valve will find it in our model. Acronos M1 Pure Class A.
The power amplifier is equipped with the KT 120 in pure Class A configuration ultralinear, delivering a maximum power of 20W.
The power supply circuit is high solid-state performanceThe linear, linear with minimal ripple voltage, ensuring a constant voltage to the power valves, this guarantees a fast low frequency response and resolution capability.
Power, richness of body and an astonishing ability to solve small details of textures and harmonics.
Power valve exhaustion and working range failure (Bias) light detector.
Glorious mid-range, wide scene and splendid dynamics
A universe of nuances, with an enriching softness and body. Those looking for the silk and texture of the valve will find it in our model. Acronos M1 pure class A.
The power amplifier is equipped with the KT 120 in pure Class A configuration ultralinear, delivering a maximum power of 20W.
The power supply circuit is high solid-state performanceThe linear, linear with minimal ripple voltage, ensuring a constant voltage to the power valves, this guarantees a fast low frequency response and resolution capability.
Power, richness of body and an astonishing ability to solve small details of textures and harmonics.
Power valve exhaustion and working range failure (Bias) light detector.
TRADITIONAL ELECTRONICS
Electronics is the soul of any amplifier. We use superior quality components to ensure a exact fidelity and top quality. All these aspects guarantee perfect operation for many years.
We are committed to traditional electronicsWe do not use SMD type electronic components, only components with SMD type electronic components. We do not use SMD type electronic components, but only components with an very high or no planned obsolescence.
The side legs are made of a22mm solid zero.
The front panels are made of 1.5 mm brushed stainless steel, in addition to the screen printing which is carried out manually and the application of UHS varnish finish with corresponding polishing.
The chassis is made of 1.5mm carbon steel thickness, machined by hand.
The paint finish on the chassis has a imposing deep red appearanceThis is due to the application of 12 coats of special paint to achieve a 3D feeling of depth.
Typology of the circuit classic pipeIn the M1 inlet stage, we use a low gain with direct couplingfor ultra-low noise. It is followed by directly coupled driver and cathode follower stages, which guarantees a very low noise level. exceptional linearity, combined with stability and high dynamic range.
We use superior quality components to ensure a exact fidelity and top quality. All these aspects guarantee perfect operation for many years.
We are committed to traditional electronicswhich rarely presents anomalies and a lack of electronic spare parts.
We do not use SMD type electronic components, only components with an very high or no planned obsolescence.
TECHNICAL SPECIFICATIONS
- Maximum delivered power 20W.
- Frequency response 20Hz to 45Khz.
- RMS power with a THD of 0.01% at 1Kz- 18W.
- Input impedance 100Khm
- Input sensitivity 100mV
- 3-input RCA type selector switch
- 4 and 8 Ohm outputs
- Input voltage 230V with overvoltage protection.
- Tubes used KT 120, 12AT7 nos and ECC 83
- Total weight 14Kg
- Dimensions 45X26X11cm
UNIQUE IDENTITY AND QUALITY IN ALL OUR EQUIPMENT
The entire manufacturing process of our amplifiers is carried out in accordance with the following principles artisanal way.From the manufacture of the chassis, electronic designs and assembly of all the electronic components, everything is done with patience and dedication.
To ensure perfect operation, all our amplifiers are subjected to stringent quality controls on an individual basis.